At Rogue we pride ourselves on using the best jewellery, equipment and techniques that we have access to, to give our clients the best service we possibly can. A lot of our regulars will know that I (Aiden) used to be a Mechanical Engineer for the MoD and specialised in metal standards and that this knowledge lead me to be a driving factor in the creation of the Material Standards for the UKAPP. Keeping up with progression is an important part of any piercing studio and any piercers career and the time has come for us to progress again.
Since the beginning of Rogue our basic range jewellery has been produced by a UK based body jewellery manufacturer who has responded well to demands from piercers to keep improving. It has come to our attention recently that this company hasn’t been as open to progression and their quality has been dropping and this has left us in the tricky position of having to change supplier. There currently isn’t another option in the UK working to the standards we require so we are beginning to import our jewellery all the way from America.
So, What’s Different?
For us to be confident to install new jewellery into a fresh piercing we must know a lot of information but by far the most important is the grade of the material. The grade of the material is connected to a standard which tells us exactly what mixture of metals make up the alloy and the exact process for how the material was made. It is quite common for piercers and clients to get hung up on the chemistry of the material but that only tells us part of the picture.
A chemistry test is used to prove what the alloy is of a specified piece of metal. A chemistry test isn’t suitable for implanted materials because it only proves the chemistry of the single piece tested rather than the entire batch. We need a higher level of guarantee that body jewellery is safe to go in the body. In the industrial world a chemistry test is fine but as every single piece of body jewellery must be safe for use in the body we need a more detailed form of guarantee.
As the item has to be ground and damaged in order to be tested, it would be unusable after the test is complete.
In the image to the left, note the sentence at the bottom “Samples submitted by customer, results relate only to items tested.”. This means that even the testing laboratory agree that this test is only suitable for the exact test piece rather than the entire batch.
Mill certificates tell us the exact process that was used to produce the metal and guarantees that all metal produced in the process will be homogeneous (Definition: Of uniform structure or composition). This is vitally important when installing jewellery into the human body.
The UK piercing industry has been specifically requesting Mill Certificates (not Chemistry tests) from all of our suppliers since the formation of the UKAPP. The reason for these requests is that in the past Titanium sourced from certain mills around the world has been found to have falsified their paperwork for Titanium used in surgical implants. This non-compliant metal only revealed itself to be unsafe when people that had medical implants started to have reactions to the metals and in a few extreme cases the implants were rejected by the body. Legislation for Body jewellery is not nearly as stringent as legislation written for medical implants, but the body can have just as serious reactions to non-safe body jewellery as it would to a non-safe medical implant. As Piercers we want every piercing to be happy and healthy so having a guaranteed safe material is of the utmost importance to us.
Important points to note on a mill certificate are:
- Material Country of Origin – For DFARS approval
- Material Grade – To show the designated grade of the material from this melt
- Melting Process – To show the process the mill followed to produce the material
- Heat/Melt Number – For batch control and material traceability
- Material Dimensions – To show which supplied raw material came from the batch
- Total Material – Shown in either weight or length – To show how much raw material was sourced
DFARS – Defense Federal Acquisition Regulation Supplement
Due to some Titanium Mills falsifying their paperwork and producing material not of the grade stated the Body Piercing Industry started to search for a form of guarantee that material sourced is of the grade advertised. There were very few options available for this and the final choice was the DFARS agreement.
DFARS is a system used by the US Defence sector. It was originally laid out to allow the American Defence Industry to source material from outside of the US and still guarantee that the material is of the correct grade. I used to work within a similar framework when sourcing Armour for the British military. As the American Defence sector is incredibly specific about the metals used in their products this was the perfect system for the body jewellery industry. This system may seem like it doesn’t apply to body jewellery but as there aren’t any systems for material guarantees outside for the defence world, the DFARS agreement is currently the best system we have.
Rather than have individual companies or metal mills be compliant with DFARS, different countries will claim compliance. This means that any material sources from these countries will have a guarantee it was produced using a process specified in the material grade. Current countries in the DFARS agreement are:
|Estonia||Netherlands||United Kingdom of Great Britain and Northern Ireland|
The UK is a DFARS compliant nation, but as we have no Titanium Mills here we must source our Titanium from elsewhere. Currently the vast majority of titanium is produced in China but as China isn’t a DFARS compliant country we CANNOT accept this as safe for use in body jewellery. Currently most verifiable implant grade Titanium is sourced from US or Italian mills.
At Rogue we are constantly shouting about surface finish. This is because there is a direct link between the quality of the surface finish, the ease of healing and the long term health of a piercing. The suppliers we are switching to achieve a much better polish so this will be a big improvement on our current basic range. A better (more shiny) surface finish improves your healing process. We discuss this in lots of details in our dedicated Surface Finish blog!
The new suppliers we are moving too also have a much tighter Quality Control system. this means that there will be less issues with jewellery coming unscrewed, being lost or being damaged. We would love to live in a world where products are 100% perfect all the time but sadly this isn’t realistic. The companies we are switching to also want to live in a world where products are perfect 100% of the time and we are excited to be working with companies that have such pride in their products.
With higher quality Titanium, better quality control, international shipping, import tax, inflation and the damage to the supply chain that COVID has caused we will be seeing a price rise on our basic options. We never like having to put our prices up but during this time we are going to have to. We will give all of our clients plenty of notice so we can all prepare for the change.
We are not in the business of changing prices without giving you plenty of notice! We are aiming to change our basic range jewellery to new, higher-quality basic jewellery in January. Any appointments after this day will have a different cost for basic jewellery – Our high-end prices are staying the same!
As always we will be striving to be the best piercers we can be and will continue to do the best we can for our clients. That’s it for this week. We’ll be back next week with a blog all about circular barbells. Have a good week everyone!
Thank you for reading. If you have any questions, you can contact us via email or instagram.